Serving Johnson City, Kingsport & the Tri-Cities (423) 900-8254

Tri-Cities Price Guide

Epoxy Flooring Cost in Johnson City, TN

Installed prices for garage, basement and shop floors across the Tri-Cities, by coating system and by size. Below the prices: why a garage in Elizabethton often costs more to prep than the same garage in Jonesborough, using Census housing-age data and NOAA freeze counts.

Illustrative example of a finished industrial epoxy floor in a commercial space

423 Epoxy Pros is a referral service for epoxy and concrete coating jobs in Johnson City and the Tri-Cities. Every price on this page is an installed range for this market, kept in one table that the site's calculator reads too.

How much does epoxy flooring cost per square foot?

$4 to $16 a square foot, installed. The coating system sets most of that spread: solid color sits at the bottom, flake in the middle, polyaspartic and metallic at the top. The slab sets the rest. A sound slab lands low in its system's range. A slab with open cracks, worn joints or an old coating to strip lands high.

On a Johnson City 2-car garage of 400 to 500 square feet, that is about $1,800 for plain solid color on good concrete, up to $8,000 for a hand-worked metallic floor.

How much does it cost to epoxy a garage floor?

In flake epoxy, the system most Tri-Cities garages get, size does most of the work:

Flake epoxy installed cost by garage size, Tri-Cities
Garage size Approx. sq ft Flake epoxy cost
1-car garage 240–300 $1,500–$3,000
2-car garage 400–500 $2,300–$4,500
3-car garage 600–750 $3,200–$6,500

Notice the 1-car garage costs more per square foot than the 3-car. Moving grinders, dust extraction and a crew to the house costs the same for a small floor as a big one, so small jobs carry it over fewer feet. Pairing the garage with a basement or shop floor in the same visit is the simplest way to bring the rate down.

Thinking of doing it yourself instead? The how to epoxy a garage floor guide shows the steps a kit skips, and the best epoxy for a garage floor guide compares the products themselves.

Cost by coating system

Picking the system can double the per-foot price by itself. Here are the four common ones on the same 2-car garage.

Installed cost by coating system, Tri-Cities 2-car garage
System Per sq ft 2-car garage
Solid-color epoxy $4 – $7 $1,800 – $3,200
Flake (chip) epoxy $5 – $10 $2,300 – $4,500
Polyaspartic system $7 – $14 $2,800 – $6,500
Metallic epoxy $9 – $16 $3,600 – $8,000
  • Solid-color epoxy. One flat color with no broadcast on top. The lowest professional price, and the finish that shows every tire scuff and drift of pollen.
  • Flake (chip) epoxy. Colored vinyl chips scattered into the wet coat. The chips hide hairline cracks and patch marks, which matters on the older slabs common in Kingsport, Bristol and Elizabethton.
  • Polyaspartic system. Cures in hours instead of a day and does not yellow in sun. It also cures in cooler weather than epoxy, which widens the season here. Expect roughly 30 to 50 percent over a comparable epoxy job.
  • Metallic epoxy. Pearl-like pigment worked by hand into swirls while the coat is wet. You pay for the hours of hand work and the heavier pigment, not for a tougher floor.

The flake epoxy, polyaspartic and metallic epoxy pages cover each finish in depth. If it is down to the two most common, the polyaspartic vs epoxy comparison puts them side by side.

Why the same garage costs more to prep in Elizabethton than in Jonesborough

The coating price per foot is the same across the Tri-Cities. What changes from town to town is the concrete under it, and the age of the house is a fair guide to the age of the slab. The towns we serve are not alike. More than half of Elizabethton's homes were built before 1970. In Jonesborough it is about one in four, close to Tennessee as a whole.

Share of homes built before 1970
  • Elizabethton 58%
  • Bristol 48%
  • Greeneville 47%
  • Kingsport 42%
  • Johnson City 33%
  • Jonesborough 28%
  • Tennessee 27%
U.S. Census Bureau, American Community Survey 2024 5-year, table B25034, all housing units. Our tally of the 1960s and earlier rows.

An older slab has had more winters to crack, more years of oil and road salt soaking in, and often a layer of paint or sealer someone rolled on decades ago. All of that is prep work, and prep is priced before the first coat. This is what that tends to mean town by town:

Housing age and typical slab prep by Tri-Cities town
Town Median home built What to expect on prep
Elizabethton 1963 Expect crack and joint work on most slabs, and ask about old paint or sealer that has to come off.
Bristol 1971 Older streets near downtown run like Elizabethton; the newer Volunteer Parkway subdivisions usually need standard grinding only.
Greeneville 1971 Close to Bristol's mix. Budget for joint repair on the older in-town houses.
Kingsport 1975 A split town: 1920s–1960s concrete near downtown and Lynn Garden, sound post-2000 slabs toward Colonial Heights.
Johnson City 1983 Most garages land mid-range. The Tree Streets and older in-town homes sit at the top of it.
Jonesborough 1986 The youngest housing in the list. The historic district is old, but most garages are newer builds.

Median year built: ACS 2024 5-year, table B25035. For comparison, Tennessee's median is 1987. A town figure is an average. Your own slab is what gets quoted.

Freeze-thaw: the prep cost the weather adds

Johnson City sits at about 1,600 feet, and its winters are colder than lower East Tennessee's. NOAA's 30-year normals for Tri-Cities Regional Airport count 94 nights a year at or below freezing, against 67 at Knoxville's airport. Only about 7 of those days stay frozen all day. So roughly 87 days a year freeze at night and thaw by afternoon, compared with about 62 in Knoxville.

Every one of those cycles works on bare concrete. Water in a hairline crack freezes, expands and widens it a little. Salt melt dripping off a car in January speeds it up. That is why an uncoated Tri-Cities garage usually shows more crack and joint wear than its age alone would suggest, and why the repair line on a quote is rarely zero here.

Freezing nights a month, Tri-Cities Regional Airport
  • October 3
  • November 15
  • December 20
  • January 22
  • February 18
  • March 12
  • April 4
NOAA NCEI, U.S. Climate Normals 1991–2020, station USW00013877, average nights with a low of 32°F or colder. May through September average zero or close to it.

The same chart sets the season. Epoxy cures on schedule with the slab and air at about 60°F or warmer, and slowly below that. From November through March the normal low at the airport stays under 36°F, which is why spring and early fall book up first, and why polyaspartic, which cures in cooler weather, gets used more in the shoulder months. An attached garage runs warmer than the airport, so a cold-month job is a question for the installer, not a no.

Cost for basements and larger floors

Bigger floors get a lower per-foot rate for the same reason small ones get a higher one. Typical Tri-Cities ranges:

  • Basement, 800–1,200 sq ft: about $4,500 to $11,000. The first question is moisture, not color. A basement floor below grade on a hillside lot usually needs a vapor primer.
  • Shop or commercial floor, 2,000+ sq ft: usually $4 to $9 a square foot. The commercial & industrial page covers chemical and forklift ratings.

To run your own measurements, the epoxy calculator works out the square footage, the gallons a job needs and the installed range for each system, from the same prices as this page.

The line items that move a quote

Two quotes for the same garage can be far apart and both be honest. The gap is nearly always in these lines.

Quote line items that change the price
Line item Why it is there In the Tri-Cities
Crack and joint repair Cracks and worn saw-cut joints get filled before any coating, or the coating cracks along them inside a year or two. About 87 freeze-thaw days a year here keep opening them. On a normal 2-car garage, $300–$600.
Removing an old coating Peeling paint, a failed kit or old sealer has to be ground off to bare concrete first. Most common on the older housing in Elizabethton, Bristol and in-town Kingsport.
Vapor primer A slab pushing moisture up lifts any coating. A vapor-blocking primer goes down first. Mostly basements and hillside walkouts. $1.25–$2.50 a square foot of treated floor.
Extra colors Two- and three-color chip blends and custom metallic swirls take more material and more hours. One color still looks finished and costs less.
Grit in the topcoat A fine anti-slip grit for garages that track in rain and snow. A small material cost.
A second clear coat More wear layer on top. Adds cost and years. Worth asking about on a garage that faces west or south.

What lowers a quote is mostly the reverse: a sound slab, one color, a bigger floor in one visit, and a booking outside the spring rush. If the garage is shaded and lightly used, flake epoxy without the polyaspartic upgrade is a fair choice. The concrete repair & prep page explains what the repair lines involve.

DIY kit vs. professional install — the honest cost comparison

A store kit is $200 to $600. A professional flake floor on the same 2-car garage is $2,300 to $4,500. Here is the math most cost pages skip.

Per year, the kit can actually be cheaper in cash. If it lasts its typical 2 to 3 years, that is roughly $70 to $300 a year in material, plus your weekends. A professional floor over a 10 to 15 year life works out to roughly $150 to $450 a year.

What the professional price buys is the prep a kit cannot do: a diamond-ground surface the coating can grip, filled cracks, a moisture check, and three coats of high-solids product instead of one thin one. A kit over etched concrete tends to lift first at the door edge and under the tires. When it does, it has to be ground off before anything better can go down, so a failed kit adds to the cost of the floor you end up with.

How to read an epoxy flooring quote

Put each quote next to these six questions. A good quote answers them without being asked.

Epoxy quote checklist
Ask A good answer A warning sign
How is the slab prepped? Diamond grinding with dust extraction. Acid etching, or no prep method named at all.
How many coats? Primer, base coat and topcoat, each named. One coat, or "a coat of epoxy".
What product, and how much solids? A named product, often 100% solids. No product name, or a water-based kit product.
Is crack and joint repair in the price? Yes, or a separate line with a number. Not mentioned anywhere.
What does the warranty cover? Peeling and topcoat wear, in writing, with the years. A verbal promise.
Is it a moisture-tested slab? A test before coating, especially below grade. "Our coating handles moisture" with no test.

Licensing in the Tri-Cities. Tennessee's Home Improvement License ($3,000 to $24,999 residential jobs) only applies in the nine counties that adopted it, and Washington, Sullivan, Carter and Greene counties are not among them. A job of $25,000 or more needs a state contractor license anywhere in Tennessee. Either way, a business license and general liability insurance are fair things to ask for, and any state license can be checked on the Tennessee verification portal.

Get an exact price for your floor

Every number here is a range. A firm price needs someone to measure the floor and look at the concrete. Call (423) 900-8254 or send the town, the space and its rough size through the form, and we pass it to an independent local installer, who measures, checks the slab and writes up the full system so you can compare it line by line.

Get your floor to a local installer → (423) 900-8254

Frequently asked questions

How much does it cost to epoxy a garage floor?

A standard Tri-Cities 2-car garage (400 to 500 square feet) runs $2,300 to $4,500 in flake epoxy, installed. In other systems the same garage runs $1,800 to $3,200 (solid color), $2,800 to $6,500 (polyaspartic) and $3,600 to $8,000 (metallic). A 1-car garage runs $1,500 to $3,000 and a 3-car garage $3,200 to $6,500. Slab condition decides where in the range a job lands, and in the Tri-Cities that tracks the age of the house.

How much to epoxy garage floor per square foot?

Installed in Johnson City and the Tri-Cities: $4 to $7 for solid-color epoxy, $5 to $10 for flake, $7 to $14 for polyaspartic and $9 to $16 for metallic. The per-foot rate falls as the floor gets bigger, because the setup cost of a job is the same whether the floor is 250 or 750 square feet. Commercial floors over 2,000 square feet usually run $4 to $9.

How much does an epoxy garage floor cost vs polyaspartic?

On a 2-car garage, polyaspartic usually adds $1,000 to $2,000 over flake epoxy. The extra buys a topcoat that does not yellow in sun, a one-day job instead of two, and a coating that cures in cooler weather. That last point matters here: the Tri-Cities averages 15 freezing nights in November and 12 in March, so epoxy's season is shorter than polyaspartic's. Our polyaspartic vs epoxy page has the full comparison.

How much does it cost to epoxy a basement floor?

A Tri-Cities basement of 800 to 1,200 square feet runs about $4,500 to $11,000 installed. The number that moves most is moisture: if the slab pushes vapor up, a vapor-blocking primer adds $1.25 to $2.50 a square foot of treated floor. Hillside walkout basements in Elizabethton and around Watauga Lake almost always need it; flat basements in newer subdivisions usually do not.

Why are professional quotes so much higher than a DIY kit?

A store kit costs $200 to $600 and is a thin, often water-based coat rolled over acid-etched concrete. A professional flake job ($2,300 to $4,500 on a 2-car garage) grinds the slab, repairs the cracks, and builds three coats of high-solids product. Kits commonly start peeling at the door edge and under tires in 2 to 3 years, and the slab then has to be ground clean before anything better goes down.

What makes one epoxy quote cheaper than another?

Almost always something left out: acid etching instead of grinding, one coat instead of three, crack repair not included, or a lower-solids product. Line two quotes up on prep, coats, product and warranty before comparing the totals. When those match, the gap is real. When they do not, the cheap quote is usually missing work the slab needs anyway.

Does concrete repair add to the cost?

Yes, when the slab needs it. Cracks, worn joints, pitting and flaking surface (spalling) are fixed before coating. On a 2-car garage with normal age cracking, that work runs about $300 to $600 on top of the coating. Heavy spalling, a full skim coat or grinding off an old failed coating is priced as its own line. Older housing, like Elizabethton's (median home built 1963), needs this more often.

How do I get an exact price for my floor?

An exact price needs someone to measure the floor and look at the concrete. Call (423) 900-8254 or send the floor through the form, and we pass it to an independent local installer, who measures, checks the slab and gives you the full system in writing. Be wary of a firm price on a floor nobody has seen.

Areas we cover

These prices hold across Johnson City, including Tree Streets, Carnegie, Boones Creek, Gray, Southwest Johnson City, and out to epoxy flooring in Kingsport, epoxy flooring in Bristol, epoxy flooring in Jonesborough and epoxy flooring in Elizabethton. Distance inside the Tri-Cities does not change the range; the slab does. See the full service area →

Sources we checked

Last updated: November 9, 2026

Thinking about coating your garage or shop floor?

Describe the floor and we pass it to an independent local installer in Johnson City, Kingsport, Bristol, or the surrounding Tri-Cities. Asking is free.

Call (423) 900-8254 · Floor Coating Help